玻璃鋼雕塑厚度不能決定質量，取決于玻璃鋼纖維布的層數，所用樹脂的質量，正常厚度是3MM，大型的雕塑需要做鋼骨架支撐，正確的玻璃鋼雕塑制作方法是均勻的薄薄的樹脂鋪墊一層纖維布，按這個工序重復3-5遍，如果當是靠樹脂來堆積厚度，玻璃鋼雕塑沒有纖維布的保護，很容易就斷裂了。
The thickness of FRP sculpture can not determine the quality, it depends on the number of layers of FRP fiber cloth and the quality of resin used. The normal thickness is 3 mm. Large sculpture needs to be supported by steel framework. The correct method of making FRP sculpture is to evenly lay a layer of fiber cloth with thin resin. Repeat this process for 3-5 times. If the thickness is accumulated by resin, there is no fiber in FRP sculpture Vibe's protection, it's easy to break.
玻璃鋼雕塑制作工藝：成品制作前，先將所要制作的產品用特定泥塑材料造出相應要制作的產品，在泥塑稿制作完成后，翻制石膏外模，然后將玻璃鋼(即樹脂和玻璃絲布的結合物)涂刷在外模內部。等其干透后打開外模，經過合模的程序，獲得玻璃鋼雕塑成品。但玻璃鋼雕塑在室外經過太陽的暴曬和風蝕，一般五年以上就開始有變形，脆弱易裂的缺點。
Glass fiber reinforced plastic sculpture production process: before the production of finished products, the products to be made should be made with specific clay sculpture materials. After the clay sculpture is made, the plaster external mold is turned over, and then the glass fiber reinforced plastic (that is, the combination of resin and glass fiber cloth) is painted inside the external mold. After it is completely dried, open the outer mold, and get the finished product of FRP sculpture through the mold closing procedure. However, after being exposed to the sun and eroded by wind, FRP sculptures begin to deform and crack after more than five years.
玻璃鋼雕塑厚度越厚，相對應的也會越貴，綜上所述，玻璃鋼雕塑厚度并不是越厚越好！
The thicker the FRP sculpture is, the more expensive the price will be. To sum up, the thicker the FRP sculpture is, the better!
