GRC構件的使用我們在平日里其實是見到過的，構件成品的表面一般是水泥混凝土的樣子，比如說剛剛建造起來的建筑表面還沒粉刷的效果。所以GRC構件建筑后是需要涂料粉刷的，那么GRC構件的涂料怎么刷一刷有好作用呢？
The use of GRC components we have seen on weekdays, the surface of the finished components is generally cement concrete, such as the building surface has not been painted. So GRC component building is the need for paint to paint, then GRC component paint how to brush a brush has a good effect?
GRC構件基本可分為歐式裝飾柱、各種檐線、門窗頂套、門窗線套、裝飾花飾、仿石六大類。設計師通過仿真設計，實現建筑典雅、簡約逼真、美觀壯觀、自然古樸。采用同質透心礦物原料，可以根據客戶的需求做成各種不同顏色及不同造型的藝術效果。其表面可做成噴砂面、荔枝面、光面等不同質感效果，也可以做成條形、浮雕、鏤空等不同肌理效果。
GRC components can be basically divided into European decorative column, all kinds of eaves line, door and window top set, door and window line set, decorative decoration, imitation stone six categories. Through the simulation design, the designer realizes the noble and elegant architecture, simple and lifelike, beautiful and spectacular, natural and simple. Using the same core mineral raw materials, can be made according to customer needs of different colors and different shapes of the artistic effect. Its surface can be made into sandblasting surface, litchi surface, smooth surface and other different texture effects, can also be made into strip, relief, hollow and other different texture effects.
通常，GRC構件由具有長纖維和骨骼的硫鋁酸鹽快硬水泥制成，這種水泥也是強堿性，pH值為11-12。但是，由于元件是在一定的溫度和濕度下由模具制成的，因此回堿速度非常快。一般在脫模后之內，成品的PH值可以降到7-9之間。
Typically, GRC components are made of sulphoaluminate fast setting cement with long fibers and bone, which is also strongly alkaline and has a pH of 11-12. However, because the components are made from molds at a certain temperature and humidity, the alkali return rate is very fast. Generally within one day after demoulding, the PH value of the finished product can be reduced to between 7 and 9.
因此，在
濟南GRC構件涂漆時，只要將構件界面表面用膩子抹平即可。而對于有經驗的紅松林grc組件相關人員來說，這種情況根本不是問題，在制造組件時添加回堿劑就足夠了。
Therefore, in Ji 'nan GRC component paint, as long as the component interface surface with putty can be wiped flat. For experienced Korean pine GRC components related personnel, this situation is not a problem at all, in the manufacture of components to add back to the alkali agent is enough.
除了干掛、濕貼大理石或貼瓷磚外，建筑物一般都需要粉刷。但普通硅酸鹽水泥呈強堿性，pH值在11-13之間。直接涂油漆會掉色。要想改變這種狀況，就須等待墻體水泥的pH值降到7-9之間。只有在接近中性的時候才能上漆，也就是業內常說的GRC構件回堿的過程。
Buildings generally require painting, except for dry hanging, wet marble or tile. But ordinary Portland cement is strongly alkaline, pH between 11 and 13. Applying paint directly will fade the color. To change this situation, it is necessary to wait for the pH value of wall cement to drop to between 7 and 9. Only when it is close to neutral can it be painted, which is often said to be the process of GRC component alkali back in the industry.
GRC構件的涂料怎么刷一刷有好作用？這個問題的講解內容就到這里，如果只是用構件做外墻裝飾看起來很粗糙，所以后期還要進行處理，用涂料進行粉刷是很好很有效果的方法。更多內容就來網站
www.nyqaac.com咨詢吧！
GRC component paint how to brush a brush has a good effect? This problem is explained here, if you just use components to do the exterior wall decoration looks very rough, so later processing, painting with paint is a very good and effective method. More content to the website www.nyqaac.com consultation!
