GRC構件是一種通過造型、紋理、質感與色彩表達設計師想象力的材料。下面小編給大家介紹一下GRC構件的性能主要表現在哪些方面。

GRC component is a kind of material that expresses designers' imagination through modeling, texture, texture and color. The following editor will introduce the main performance aspects of GRC components.

⑴GRC構件采用特種低堿水泥與特種玻璃纖維復合材料經過多種工序精制而成，其具有高強度、抗老化、質量輕、成型多樣化、施工簡單、耐火、耐候化、耐酸堿等優點。與混凝土同等性能及壽命，使其成為歐陸式建筑及景觀等工程的新寵。在造型應用上，因其的性能從普通的石膏裝飾材料、玻璃鋼等造型材料中脫穎而出。

⑴ GRC components are made of special low alkali cement and special glass fiber composites through various processes, which have the advantages of high strength, anti-aging, light weight, diversified molding, simple construction, fire resistance, weathering resistance, acid and alkali resistance, etc. With the same performance and service life as concrete, it has become the new favorite of European architecture and landscape engineering. In modeling application, it stands out from ordinary gypsum decorative materials, FRP and other modeling materials because of its excellent performance.

⑵其主要的物理力學性能、強度模量1.8～2.8×104m/㎡，抗沖強度15～25kg/m2，抗壓強度4.7kg/m2。

(2) its main physical and mechanical properties and strength modulus are 1.8 ~ 2.8 × 104m/ ㎡, impact strength 15 ~ 25kg/m2, compressive strength 4.7kg/m2.

⑶GRC構件模具采用玻璃鋼制作經過精雕細琢、拋光打磨而成，使其生產的構件表面光滑，符合設計圖紙要求。

(3) GRC component mold is made of glass fiber reinforced plastics and is carefully carved, polished and polished to make the surface of the components produced smooth and meet the requirements of the design drawings.

⑷濟南GRC構件在生產過程中，經過表面保護處理，內部分布防震、防裂玻璃纖維網布均勻應力預埋鋼筋和沙漿高壓噴制而成、浸泡保養、等工序而成。

(4) in the production process, Jinan GRC components are made by surface protection treatment, internal distribution of shockproof and crack proof glass fiber mesh, uniform stress embedded reinforcement and mortar, high-pressure spraying, soaking maintenance, and other processes.

⑸其構件在出廠前、經過嚴格的質量層層把關，不放過任何一件不合格產品出廠。構件的缺口不大于4cm;構件的幾何尺寸不超過標準尺寸±5mm為合格;每塊構件不得有橫向貫通構件底面的暗裂。

(5) before leaving the factory, its components have been strictly checked at all levels of quality, and no unqualified products are allowed to leave the factory. The notch of the component shall not be greater than 4cm; If the geometric dimension of the component does not exceed ± 5mm of the standard dimension, it is qualified; Each member shall not have concealed cracks on the bottom surface of the transverse through member.

此外如果GRC構件的邊角或形狀復雜的凸起部分與外界接觸面積較大，水汽侵入的可能性也較大，往往是先發生凍融破壞的地方，所以這個問題要多注意，更多內容就來網站http://www.nyqaac.com咨詢吧。

In addition, if the edges and corners of GRC components or the convex part with complex shape have a large contact area with the outside world, the possibility of water vapor intrusion is also large, and it is often the place where freeze-thaw damage occurs first, so pay more attention to this problem, and come to the website for more information http://www.nyqaac.com Consult.