目前，建筑業發展的很迅速，高層建筑物遍布城市的各個角落，但GRC線腳通常都是用于建筑物上面的。而GRC線腳主要用于房屋裝飾，這樣建設的房屋看起來將會非常漂亮。但是很多人不是特別了解GRC線腳的安裝步驟。接下來，跟GRC構件廠家一起來看看GRC線腳的六大步驟吧!
At present, the construction industry is developing rapidly, high-rise buildings are all over the city, but GRC pins are usually used on buildings. GRC is mainly used for house decoration, so the house will look very beautiful. But many people don't know the installation steps of GRC pins. Next, let's take a look at the six steps of GRC pins with GRC component manufacturers!
安裝GRC絲腳有三種方法，即收縮螺釘固定法植入和直接焊接螺釘固定法?；蛘哂娩摷芄潭ㄔ趬ι系膅rc構件焊接在鋼架上。這三種方法可以用來裝飾施工現場的金屬線腳。
There are three ways to install GRC pins, which are contraction screw fixation, implantation and direct welding screw fixation. Or the GRC members fixed on the wall with steel frame are welded on the steel frame. These three methods can be used to decorate the metal foot of the construction site.
玻璃纖維增強復合材料線腳安裝步驟：
The installation steps of glass fiber reinforced composite foot are as follows:
1、根據施工圖，彈出grc構件待安裝部位的定位線(中線或邊線)。
1. According to the construction drawing, pop up the positioning line (middle line or side line) of the GRC component to be installed.
2、張貼grc組件時，應翻轉網格布。在特殊情況下，可以不翻包直接張貼。用薄層全粘法粘貼、揉制發泡聚苯乙烯構件，使砂漿從四周溢出，粘結縫寬度不得大于3毫米，粘結縫應隨粘隨鉤，灰縫應飽滿，發泡聚苯乙烯構件表面應保持整潔。
2. When posting GRC components, you should flip the grid cloth. Under special circumstances, it can be posted directly without turning over the package. The foamed polystyrene components shall be pasted and kneaded by the thin layer full adhesion method to make the mortar overflow from all sides. The width of the bonding joint shall not be greater than 3mm. The bonding joint shall be hooked with the bonding, the mortar joint shall be full, and the surface of the foamed polystyrene components shall be kept clean.
3、GRC構件廠家對于較大的grc組件，有安裝要求，需要提供臨時固定的支撐。
3. GRC component manufacturers have installation requirements for larger GRC components and need to provide temporary fixed support.
4、裝置如需拼接，應預先測量裝配比例和視點，并在平坦處進行預裝配，間隙不大于3毫米、粘結砂漿用作拼接和粘結數據。砂漿的稠度可以做得更大，并選擇薄層全粘結法。拼接時，要求輕輕均勻地揉搓和錘擊，使灰縫符合要求。
4. If the device needs to be spliced, the assembly proportion and viewpoint shall be measured in advance, and the pre assembly shall be carried out at the flat place, with the gap not more than 3mm, and the bonding mortar shall be used as the splicing and bonding data. The consistency of mortar can be made larger, and thin layer full bonding method is selected. When splicing, it is required to rub and hammer gently and evenly to make the mortar joint meet the requirements.
5、拼接灰縫后，使用砂漿刀勾平整合grc組件。鉆孔后，如果grc部件的接縫處有多余的粘結砂漿，可以用砂紙打磨。鉆孔后，grc構件拼接部位用抗裂專用膠進行加工。處理方法請參考防裂專用膠的使用說明。
5. After splicing the mortar joint, use mortar knife to level and integrate GRC components. After drilling, if there is excess bonding mortar at the joints of GRC components, sandpaper can be used for grinding. After drilling, the splicing part of GRC component is processed with special anti crack adhesive. Please refer to the instructions of the special anti cracking adhesive for treatment.
6、施工后注意成品grc構件的保護，嚴禁踩踏和撞擊重物，如果有任何損壞，整個電動助力轉向系統部件應拆除并重新組裝。
6. After construction, pay attention to the protection of finished GRC components. It is strictly forbidden to step on and hit heavy objects. If there is any damage, the whole electric power steering system components should be removed and reassembled.
安裝程序非常具體。我相信你已經理解了，它被廣泛使用，在很多地方都能看到。此外，有才華的朋友在購買新房子后，也可以使用GRC金屬線腳來裝飾安裝，這將使整個房子看起來特別大氣。
The installation program is very specific. I believe you have understood that it is widely used and can be seen in many places. In addition, after purchasing a new house, talented friends can also use GRC metal pins to decorate and install, which will make the whole house look particularly grand.
The above describes the six steps of GRC pins, the whole process is more detailed, after the installation of GRC pins, the effect of the whole house will become more atmospheric and beautiful, if you want to install such materials when decorating the house, you can contact our website: Shandong GRC components http://www.nyqaac.com 。
