現在的人比較喜歡西式的裝修，但是在西式的裝修當中運用比較多的建筑材料是grc構件，這種材料對建筑的美觀性有著大大的提升作用，那么濟南GRC構件要怎么裝才能做到美觀實用？

　　Now people prefer western decoration, but in the western decoration of the use of more building materials is GRC components, this material has a great role in improving the beauty of the building, so how to install ji 'nan GRC components to achieve beautiful and practical?

　　操作條件：主體結構驗收合格，平整度、垂直度符合規范要求，結構表面須牢固光滑。

　　Operating conditions: main structure acceptance, flatness, verticality in line with the requirements of the code, structure surface must be firm and smooth.

　　彈性線：GRC裝飾構件一般安裝在平面、內角和其他部件上，而平面安裝則需要在組件的水平和垂直方向設置控制線。安裝在遮陽角上的部件需要在兩面上都有彈性水平控制線和垂直控制線。

　　Elastic lines: GRC decorative components are generally installed on flat surfaces, inside corners and other components, while flat installation requires control lines to be set in the horizontal and vertical directions of the components. Parts mounted on shading angles require elastic horizontal and vertical control lines on both sides.

　　鉆孔：由于GRC裝飾構件主要依靠預留在增強水泥上的地腳螺栓與實體結構連接，孔的深度、直徑和位置必須滿足要求。針對不同的部件選擇不同的錨固螺栓。根據構件上的孔位和結構表面控制線鉆孔。

　　Drilling: Since the GRC decorative components are mainly connected to the solid structure by the anchor bolts reserved on the reinforced cement, the depth, diameter and location of the holes must meet the requirements. Different anchoring bolts are selected for different parts. Drill holes according to the hole position on the member and the control line on the structure surface.

　　修正。一般來說，兩個人同時負責糾正和固定GRC零件安裝部件。大型部件需要用倒鏈或電動葫蘆移動。，部件的孔位與鉆孔對齊，地腳螺栓是固定的對角線，安裝位置用水平尺和鉛錘檢查，地腳螺栓被準確地?cái)Q緊，以確保部件的接觸面接近附件表面。

　　Correction. Generally, two people are responsible for correcting and securing the GRC component mounting parts. Large parts need to be moved by reverse chain or electric hoist. First, the hole position of the component is aligned with the drilling hole, and the anchor bolts are fixed diagonally. The installation position is checked with a level and plumb hammer, and the anchor bolts are tightened accurately to ensure that the contact surface of the component is close to the accessory surface.

　　安裝濟南GRC構件或特殊grc構件不能使用緊固錨時，須安裝grc構件中的埋設部件，并在連接器的嵌入式部件上涂上防銹漆。

　　When installing Ji 'nan GRC components or special GRC components can not use the fastening anchor, the embedded parts of the GRC components must be installed, and the embedded parts of the connector are coated with anti-rust paint.

　　以上就是我們的分享的內容，希望以上的內容可以幫助到大家。想了解更多資訊歡迎登錄我們官網www.nyqaac.com吧。

　　The above is our share of the content, I hope the above content can help you. For more information, please visit our official website www.nyqaac.com.